How do you use the Nerf Longstrike CS 6?

How do you use the Nerf Longstrike CS 6?

  1. Pull cocking mechanism all the way. back until fire-ready indicator is red. Load darts into Quick-Reload Clip. • Insert 1 CLIP-SYSTEM DART at. a time and push down. • Be sure darts are inserted in. direction indicated on clip. • Clip can hold up to 6 CLIP- SYSTEM DARTS.
  2. Insert clip.
  3. Slide cocking mechanism all the way.

What does an air restrictor do in a Nerf gun?

Air restrictors are used to represent pieces inside of a Nerf blaster that cut off air flow when the dart is not all the way back in the barrel, to prevent the plunger system from becoming damaged when dry fired. They are normally located in the back the blaster’s barrel and are often attached to the dart post.

Is it illegal to modify a nerf gun?

Hasbro is against modding due to safety implications. Due to these warnings, it is a common myth that modding is illegal. This is entirely false. In the United States, though, if the modder is using live firearm ammunition or explosives in their modification without a license, those mods are illegal.

Can you make Nerf guns more powerful?

Upgrade the spring. If you want more power out of your gun, upgrade to a stronger spring. Examine the firing components of the gun, pulling the spring loose. It’s a cheap, flimsy piece of metal, that you can easily upgrade with a trip to the hardware store.

How far does the Nerf Longstrike CS-6 shot?

35 feet
The Longstrike CS-6 is the longest NERF blaster! The blaster is over three feet long and fires up to 35 feet. Attach the barrel extension for long-range targeting and use the flip-up sight to help you zero-in on targets near and far.

How to mod Nerf Longstrike CS-6 step by step?

Step 1: Remove the reinforcement plate by unscrewing it. (Pic. 1) Step 2: Remove the mainspring. (Pic. 2) Step 3: Remove the trigger catch. (Pic. 3) Step 4: Now you can pull off the plunger and remove the bolt sled assembly. (Pic. 4-5) Step 5: Remove the retention pin using your nail, small screwdriver, or punch.

How to remove trigger lock on Nerf CS-6?

The first lock we’ll look at is the trigger lock. This prevents you from pulling the trigger while the bolt sled is pulled back. This can be removed by simply lifting the front, hooked part of the trigger up and pulling out the lock. (Pic. 1) Step 1: Remove the rod connecting the magazine release switch and the actual magazine release. (Pic. 2)

What happens when you mod a Nerf blaster?

When performing even basic mods, there is always a risk of losing parts, cracking plastic, or not being able to re-assemble the blaster. Some of the more common blasters’ internal pictures can be found online, and it is worthwhile to use these as references. When performing cosmetic mods, care must be taken in order to not lock up any moving parts.

How to remove plastic tubing from Nerf CS-6?

When the spring and the three-pronged plastic piece has been drilled enough to fall free of the tubing, It’s time to use the drill bit’s sharp point to remove the post. Step 3: Carefully drill through the center of the remaining plastic piece until the post falls free.

When did the Nerf Longstrike CS 6 come out?

The LongStrike CS-6 is a clip system blaster that was released in 2010 in the N-Strike series. It comes packaged with a barrel extension, flip-up sight, a six dart clip , six Streamline Darts , and instructions. The LongStrike CS-6 is a bolt-action clip -fed blaster.

What’s the name of the Nerf Sniper Shot CS-6?

Not to be confused with the Longshot CS-6 or the N-Strike Modulus blaster of a similar name . The Longstrike CS-6 (known as the Sniper Shot CS-6 in Japan) is a clip system blaster that was released in 2010 in the N-Strike series. It comes packaged with a barrel extension, flip-up sight, a six dart clip , six Streamline Darts , and instructions.

The first lock we’ll look at is the trigger lock. This prevents you from pulling the trigger while the bolt sled is pulled back. This can be removed by simply lifting the front, hooked part of the trigger up and pulling out the lock. (Pic. 1) Step 1: Remove the rod connecting the magazine release switch and the actual magazine release. (Pic. 2)

What kind of blaster does a Nerf N Strike have?

BOLT-ACTION, CLIP-FED MAIN BLASTER AND SINGLE-SHOT EXTENSION BLASTER: Main blaster has bolt-action priming and includes a 6-dart clip. Extension blaster has single-dart capacity for stealthy backup

How old is the Nerf Recon CS 6?

The Recon CS-6 is a clip system Nerf blaster that was released in 2008 under the N-Strike series. It comes packaged with a Dual-Mode Light Beam, a barrel extension, a flip-up sight, a shoulder stock, one six dart clip, six Streamline Darts, and instructions.

What is the air restrictor in a Nerf gun?

What was the first NERF blaster?

Sharpshooter
The first Nerf blaster to use a form of dart was the Sharpshooter, which fired foam darts that had small fins on its ends. Released in 1992, it proved to be incredibly popular and began Nerf’s production of dart blasters. Over time, new dart types were introduced.

Is remove the air restrictor in a Nerf gun?

They are normally located in the back the blaster’s barrel and are often attached to the dart post. Modders usually remove these during blaster modification because doing so increases the range of most blasters. The removal of these pieces allows for maximum potential and no air flow restrictions to be achieved.

Is it illegal to paint the orange tip of a nerf gun?

In addition to prohibiting altering the markings or coloration of a toy or imitation gun, California law makes it illegal to take such an object out in public.

Which is the most powerful nerf gun?

Fastest firing nerf blaster the nerf n-strike elite hyper fire blaster is the fastest-firing nerf dart blaster. This fully motorized blaster unleashes up to 5 darts per second with fresh batteries, so kids can rain down a deluge of darts onto targets.