How do I find my MSI BIOS version?

How do I find my MSI BIOS version?

Check Your BIOS Version by Using the System Information Panel. You can also find your BIOS’s version number in the System Information window. On Windows 7, 8, or 10, hit Windows+R, type “msinfo32” into the Run box, and then hit Enter. The BIOS version number is displayed on the System Summary pane.

How do I reset my MSI BIOS?

Reset BIOS settings to default

  1. Press the power button to start the notebook. When MSI logo shows up, please keep tapping the “Delete” until you see the BIOS Setup Utility.
  2. After entering the BIOS menu, press “F9”.
  3. Press “F10” key.
  4. Notebook will be restart automatically.

How do I enter BIOS MSI?

  1. Restart the computer.
  2. Press the “Delete” key while the system is booting up to enter the BIOS. There is normally a message similar to “Press Del to enter SETUP,” but it can flash by quickly.
  3. Change your BIOS configuration options as needed and press “Esc” when done. Choose “Save & Exit” to save your changes.

How do I reset my MSI battery?

Use a paper clip to insert into the battery reset hole at the bottom of the unit.

  1. (Warning):
  2. Some of the models might not have the battery reset hole, please remove the power adapter and the battery (if applicable, differ by model) for 15 seconds and place it back.

What happens if the CMOS battery dies?

If the CMOS battery in your computer or laptop dies, the machine will be unable to remember its hardware settings when it is powered up. It is likely to cause problems with the day-to-day use of your system.

How do I reset my BIOS battery?

Steps to clear CMOS using the battery method

  1. Turn off all peripheral devices connected to the computer.
  2. Disconnect the power cord from the AC power source.
  3. Remove the computer cover.
  4. Find the battery on the board.
  5. Remove the battery:
  6. Wait 1–5 minutes, then reconnect the battery.
  7. Put the computer cover back on.